RoadyHolder Alternatives

RoadyHolder Standard
     • Available in Black
     • Fits Reservoirs with Bolt Holes between 42-70 mm and 4mm screws
     • Recommended for BMW K1200RS/GT, R1150RS, R1200C/CL, R1150R
     • Recommended for Honda Gold Wing
     • Recommended for all Japanese bikes with metal reservoirs with dimensions            above
     • Accepts RAM Small Diamond Mounting Ball (RAM-B-238) (Not included.)

RoadyHolder BMW Offset
   • Available in Black
   • Clutch and Brake Versions with Offset to Clear Windshield
   • For K1200LT 2004 and Prior (Brake Version Recommended to not block Temp.        Display)
   • For K1200LT 2005 (Either version can be used)
   • For R1150GS (Clutch Version Recommended so right hand can remain on                 throttle)
   • For R1150/1200RT (Clutch Version Recommended)

RoadyHolder Harley
   • Available in Black and Chrome
   • For '96-'03 XL models and '96-later VRSC, Dyna, Softail and Touring models.         Also fits clutch master cylinder on models equipped with hydraulic clutch.

RoadyHolder Installation

The RoadyHolder can be mounted to the top of a reservoir cover using the included button-head screws and spacers. Just remove two screws, insert the spacers in the indentations in the reservoir cover, line up the RoadyHolder over the spacers, and insert the supplied longer stainless steel screws.

The “Vent” bracket that comes with the XM radio can be used to mount the radio to the RoadyHolder. Here is the vent mount as it comes with the radio.

Remove the legs and height adjuster from the vent bracket.

The height adjuster supports fit into the slots on the face of the RoadyHolder.

Here is the vent-mount bracket attached to the RoadyHolder with the included screws.

This view shows the backside of the RoadyHolder, with the included locking nuts.

The Roady XT car cradle can then be mounted to the RoadyHolder/vent mount.

The final result!

 BACK